Troubleshooting-Semi-Steam-Blocked

Only Flow From Brew Head

1. Remove the tip from the steam wand and test the flow using the hot water function. If flow is restored then the tip needs to be cleaned and reattached.
2. If the flow is still blocked then there may be a blockage in the steam wand itself. Clean the wand by using a pipe brush that has synthetic or plastic bristles; metal bristles can damage the wand. Then soak the wand in a solution of hot water and backflushing powder for ten minutes. Test flow again.
3. The solenoid valve may be dirty or blocked and will need to be disassembled and cleaned.