View source for Bezzera Matrix MN/cleaning and maintenance

{{Getting-Started
|brand = Bezzera
|machine_type = Prosumers
|product_banner = <!-- [[File:Wiki_ProductPageBanner_1200x175_Profitec600_v1.jpg|link=]] -->
|product_page_title = Bezzera Matrix MN
|page_type = maintenance
|section1 = Recommended Cleaning Products
|anchor1 = Products
|section2 = Backflushing
|anchor2 = Backflushing
|section3 = Group Head Cleaning
|anchor3 = Group Head Cleaning
|section4 = Steam Wand Cleaning
|anchor4 = Steam Wand Cleaning
|section5 = Replacing the Group Gasket
|anchor5 = Group Gasket
}}
{{Maintenance-Content
|e61 = yes
|expobar =
}}
===Replacing the Group Gasket===
{{Content-Columns
|column_1 = 
Your group gasket is what creates the seal between your portafilter and your group head. On average, group gaskets should be replaced once a year. Common signs of failure are water leaking around the portafilter while brewing, and being able to easily lock the portafilter way past the middle position while brewing. It is a good idea to replace the group gasket once a year, as the older a gasket gets, the harder it is to remove. The instructions on the right will make replacing your group gasket a breeze. If you are unsure which replacement gasket to buy, please consult a member of our technical support team. 
|column_2 = 
[[File:Replacing_The_Group_Gasket_On_Your_E61_Machine.pdf|center|link=https://wiki.wholelattelove.com/File:Replacing_The_Group_Gasket_On_Your_E61_Machine.pdf]]
|media_caption = 
Replacing the Group Gasket on Your E61 Group Head
}}
----