View source for Troubleshooting-Prosumer-No-Heat

<includeonly>
====On But Not Heating====

{{{tank_instructions|}}}{{#if:{{{dual_boiler|}}}|
#'''If your machine is running off of the reservoir,''' make sure it is filled with water. Don't use distilled or reverse osmosis water, as the boilers rely on some minerals to detect water level.
#'''Make sure both the steam and the brew boilers are turned on.''' Most prosumer machines allow for individuals boilers to be turned off for energy efficiency.
#'''The steam boiler takes priority.''' If the steam boiler isn't heating for some reason, the brew boiler won't heat. Try turning the steam boiler off and see if the brew boiler starts heating.}}
#'''There is a loose, disconnected, or broken wire inside the machine.''' Remove the top of the machine and inspect the wiring.
#'''The high limit switch of the machine may have tripped.''' {{{hls_reset_instr|}}}
#'''The outlet the machine is plugged into is not rated to handle the power draw of the machine.'''
{{#if:{{{dual_boiler|}}}|
#'''In very rare cases both heating elements will have broken simultaneously.''' This will happen only if the machine is exposed to a severe power surge.
}}
</includeonly>
<noinclude>
This template calls troubleshooting instructions for prosumer machines that are turning on but not heating for either steam or brew functions. If the dual_boiler parameter is set to "Yes" additional instructions for dual boiler machines will be included.

<pre>
{{Troubleshooting-Prosumer-No-Heat
|tank_instructions =
|dual_boiler       =
|hls_reset_instr   =
}}
</pre>
</noinclude>