View source for Troubleshooting-Super-No-Power

<includeonly>
====No Power====

#<strong>Make sure the machine is plugged into an appropriate power source.</strong>
##<strong>Do not use the machine on a surge protector.</strong> This machine has a high power draw, more than a typical kitchen appliance such as a refrigerator or a microwave. Surge protectors are typically not rated to handle the amperage this machine requires.
##<strong>Make sure the power cord is firmly inserted into the power socket on the machine. 
##<strong>Try using the machine on a different outlet,</strong> and make sure the machine is the only appliance plugged into that outlet.
##<strong>Try testing another appliance on the same outlet. </strong> {{#ifeq:{{{removable_cord}}}|Yes|
#<strong>The power cord of the machine can be removed from the back of the machine as well as from the outlet.</strong> Check to make sure the cord is firmly secured in its corresponding socket on the machine. Check the cord for any damage. If the cord is secure and the machine is still not powering on then it may be the cord itself causing the issue. The cord is a standard computer power cord. Swap the cord out with another 3-prong computer power cord and see if the machine powers on. If it does then the machine needs a new power cord.}}
#<strong>Make sure the power switches are functioning properly and not broken.</strong> If the machine isn't powering on try pressing and holding the power button in the on position to see if the machine turns on. If you are able to power the machine on this way then the power switch needs to be replaced.
#<strong>If the machine recently had a leak, had water spilled on it, or any other exposure to moisture then the machine may be shorting out.</strong> Try letting the machine sit unplugged for 48 hours to make sure there isn't a short caused by moisture.
</includeonly>
<noinclude>
This template calls instruction for troubleshooting no power issues on super-automatic machines.

<pre>
{{Troubleshooting-Super-No-Power
|removable_cord =
}}
</pre>
</noinclude>