Difference between revisions of "Teak"
From Whole Latte Love Support Library
(Created page with "test") |
|||
| Line 1: | Line 1: | ||
| − | + | ==Basic Usage== | |
| + | ====Getting Started==== | ||
| + | ====== Adjusting Brew Pressure ====== | ||
| + | The machine is designed to brew at 9 bar with a flow of about 2 oz in 20-25 seconds. To | ||
| + | adjust the brew pressure, install the backflush disc and press the brew button, then turn | ||
| + | the adjustment screw located beneath the removable cup warmer until you get to 10 bar | ||
| + | on the brew pressure gauge. This will result in 9 bar brew pressure. Turning the | ||
| + | adjustment screw clockwise will raise the pressure and turning counterclockwise will | ||
| + | lower it. | ||
| + | |||
| + | |||
| + | ::: '''Note''' | ||
Revision as of 12:42, 30 January 2019
Basic Usage
Getting Started
Adjusting Brew Pressure
The machine is designed to brew at 9 bar with a flow of about 2 oz in 20-25 seconds. To adjust the brew pressure, install the backflush disc and press the brew button, then turn the adjustment screw located beneath the removable cup warmer until you get to 10 bar on the brew pressure gauge. This will result in 9 bar brew pressure. Turning the adjustment screw clockwise will raise the pressure and turning counterclockwise will lower it.
::: Note