User

Ed/Sandbox

From Whole Latte Love Support Library

< User:Ed
Revision as of 09:16, 30 September 2020 by Ed (Talk | contribs)

Accademia Error Codes

Error Code Brief Description Description
01 blocked coffee grinder the coffee grinder is blocked (jammed grinder blades or sensor is not reading properly)
03 brewing unit blocked in ‘work’ descending time-out exceeded
04 brewing unit blocked in ‘home’ ascending time-out exceeded
05 blocked water circuit water does not flow in the flow meter
06 frother unit solenoid valve short circuit in a solenoid valve of the frother unit
10 coffee boiler short circuit coffee boiler temperature sensor short circuit
11 coffee boiler in open circuit coffee boiler temperature sensor in open circuit
12 steam boiler short circuit steam boiler temperature sensor short circuit
13 steam boiler in open circuit steam boiler temperature sensor in open circuit
14 various temperature errors (in the coffee boiler) coffee boiler temperatures out of control
15 various temperature errors (in the steam boiler) steam boiler temperatures out of control
16 coffee unit short circuit brewing unit microswitch short circuit
18 clock error memory fault or impossible to set
19 no zero crossing no zero crossing on board, could also be caused by the power board

Accademia Descaling Cycle Frequency

Hardness Water Hardness Without Water Filter With Water Filter
1 Soft water (up to 7°dH) "Approx. every 6 months / 240 litres" Approx. every 12 months / 480 litres
2 Medium water (7° - 14°dH) Approx. every 3 months / 120 litres "Approx. every 6 months / 240 litres"
3 Medium water (7° - 14°dH) "Approx. every 6 weeks or 60 litres" "Approx. every 3 months / 120 litres"
4 "Very hard water (over 21°dH)" "Approx. every 4 weeks or 30 litres" "Approx. every 6 weeks or 60 litres"

The default water hardness level is 3. Each litre of water corresponds to approximately 2,000 pulses

Anima Error Key

Symbol Brief Description
Anima error 1.PNG Put back the drip tray and coffee grounds drawer; close the service door.
Example Coffee bean hopper empty.
Example Brew group not inserted.
Example The machine is out of service.
Example Coffee grounds drawer full.
Example Water tank empty.
Example N/A
Example The machine is ready to brew products: coffee bean hopper empty
Example The machine is ready to brew products: replace the INTENZA+ water fi llter
Example The machine is waiting to start the water circuit priming process.
Example The milk carafe ducts should be cleaned.
Example The machine must be descaled.
Example The machine is heating up.
Example The machine is rinsing.
Example Brew group rebooting.