View source for Rocket Espresso Cellini Premium Plus V3

The Rocket Espresso Cellini Premium Plus V3 is a [[:Category:Prosumers|Prosumer]] espresso machine which is the latest iteration of a classic machine design. {{Description-Table
|title         = Rocket Espresso Cellini Premium Plus V3
|machine_image = [[File:ROCKET_ESPRESSO_CELLINI_PREMIUM_PLUS_V3.jpg|400px|none]]
|manufacturer  = Rocket Espresso
|model_name    = Cellini Premium Plus V3
|type          = [[:Category:Prosumer|Prosumer]]
|buy_button    = Yes
|button_size   = 400px
|button_link   = https://www.wholelattelove.com/products/rocket-espresso-cellini-premium-plus-v3
}}

== Machine Description ==

A natural upgrade from its predecessor, the Rocket Espresso Cellini Premium Plus V3 features the same robust commercial components and stainless steel construction with the added functionality of a PID temperature controller. Rocket Espresso has maintained its tradition of using the best components and superior materials. The Rocket Design Engineers have continued to meet the challenge of continuous improvement and have incorporated technically advanced materials and requested user interface components in the design of the machine.

The dual manometer displays located on the front panel monitor both boiler and pump pressures, allowing for finite control of the extraction process. Similar to the other members of the Rocket family, the 1.8L copper boiler is wrapped with a special insulating blanket that produces thermal stability and reduced energy consumption. On this version Rocket has replaced the existing Sirai pressure stat with a PID temperature controller. Located behind the drip tray, the PID monitors the machine's steam temperature and can be adjusted to your preferences.

The celebrated E-61 brew group is known for delivering exceptional temperature stability. Made of chrome-plated marine brass the group is designed to create the perfect environment for espresso extraction. The thermosyphon system\ continuously circulates hot water between the boiler and brew group to keep the machine in brew-ready condition and ensure temperature stability. The system has been carefully designed to maximize water flow (20% higher volume compared to other models).

The copper boiler has always been the heart of this machine, providing heat for brewing, steaming, and hot water. The Design Engineers at Rocket Espresso looked at their iconic nickel-plated brass boiler which has a legendary history of performance and found that with modern thermally efficient materials they could actually improve its performance while still maintaining its greatly appreciated robust characteristics. The result of their thoughtful efforts is an insulated boiler with increased heat retention and thermal stability resulting in greater energy efficiency. The 1.8 liter copper boiler retains the thick lead free brass end plates for increased heat retention – Rocket Espresso is one of the few (or only) companies to use such an endplate; however, the boiler is now wrapped in a special insulating blanket. The changes have resulted in a 30% increase in thermal stability and energy savings up to 22%.

The Cellini Premium Plus V2 now has 2 full, round manometer displays that allow users to easily monitor both pump and boiler pressure allowing the Barista to fully understand the extraction parameters. Rocket Espresso’s patented cool-touch technology ensures that the steam wand is safe to use. The heavy-duty wand has a two-hole tip and is engaged with a large ergonomic control knob at the top of the wand. Below the steam wand is the steam pressure gauge – the machine is at steaming pressure when the gauge measures around 1 bar.

The Rocket Espresso Cellini Premium Plus V2 comes equipped with a low-water-level sensor that will automatically shut off the machine to prevent a dry boiler. A warning system will also alert you when the water reservoir needs to be replenished. The water reservoir has a generous 98oz capacity and is removable for easy cleaning and refilling. Remove the cup tray from the top of the machine, and remove the water reservoir using the handles. Rinse with non-abrasive detergent, and refill at the tap. A water softener can be used to increase the length of time between descaling cycles.


==Basic Usage==
===Getting Started===

{{#ev:youtube|https://www.youtube.com/watch?v=eJaPLozKysY|480|center}}

===Adjusting Brew Pressure===



===Adjusting The PID===

===Draining The Boilers===

===Pre-Infusing===


== Cleaning & Maintenance ==

{{Maintenance-Prosumer
|single_heat_exchange =
|desc_instr_avail     =
|dual_descale_instr   =
|group_gasket_link    =
|descaling_products   =
|softener_info        =
}}

== Troubleshooting ==

===No Crema or Bad Tasting Shots===

{{Troubleshooting-No-Crema-Bad-Shots}}


===Difficulty Frothing===

{{Troubleshooting-Frothing}}


===Flow Issues===

The first place to start with any flow issue is cleaning the machine. Before going through these steps please make sure the machine is cleaned according to the [[#Cleaning & Maintenance|Cleaning & Maintenance]] section of this article.

{{Troubleshooting-Prosumer-No-Steam
|steam_gauge         =
|vacuum_relief_instr =
|hls_reset_instr     =
|pstat_picture       =
|pstat_adjust_instr  =
|pstat_rep_instr     =
}}

{{Troubleshooting-Prosumer-Brew-Blocked
|grouphead_instr = 
|backflush_instr =
|valve_instr     =
}}

{{Troubleshooting-Prosumer-No-Hot-Water
|steam_gauge         =
|vacuum_relief_instr =
|hls_reset_instr     =
|pstat_picture       =
|pstat_adjust_instr  =
|pstat_rep_instr     =
}}

====No Flow At All====

{{Troubleshooting-Prosumer-No-Flow-At-All
|water_supply =
|sensor_instr =
|pump_instr   =
|valve_instr  =
}}


===Machine Is Leaking===

{{Troubleshooting-Prosumer-Bad-Gasket
|gasket_instr = 
}}

{{Troubleshooting-Prosumer-E61-Leak
|lever_style              =
|lever_leak_instr         =
|top_valve_leak_instr     =
|bottom_valve_leak_instr  =
|E61_group_cleaning_instr =
|E61_attach_instr         =
}}

{{Troubleshooting-Prosumer-Bottom-Leak
|water_source      =
|tube_reservoir    =
|level_probe_instr =
|drain_line        =
}}
 
{{Troubleshooting-Prosumer-Top-Steaming
|vacuum_cleaning_instr =
|vacuum_replace_link   =
|steam_adjust_style    =
|pstat_adjust_instr    =
|relief_stuck_instr    =
}}

{{Troubleshooting-Prosumer-Wand-Leak
|knob_instr         =
|descalable         =
|valve_rep_instr    =
|tip_instr          =
|ball_joint_instr   =
|valve_attach_instr =
}}

===Machine Not Heating Or Powering On===

{{Troubleshooting-Prosumer-No-Power}}

{{Troubleshooting-Prosumer-Brew-Cold
|temp_adjust_style     =
|pid_adjust_instr      =
|pstat_adjust_instr    =
|hls_instr             =
|element_testing_instr =
}}

{{Troubleshooting-Prosumer-Steam-Cold
|steam_test_instr      =
|temp_adjust_style     =
|pid_adjust_instr      =
|pstat_adjust_instr    =
|hls_instr             =
|element_testing_instr =
}}

{{Troubleshooting-Prosumer-No-Heat
|tank_instructions =
|dual_boiler       =
|hls_reset_instr   =
}}
 
===Portafilter Handle Not Fitting On Machine===

{{Troubleshooting-Prosumer-Portafilter}}

==Diagrams & Manuals==

{{Support-Documents
|table_style        =
|title              =
|electrical_diagram =
|hydraulic_diagram  =
|machine_manual     =
|parts_diagram      =
|service_manual     =
|startup_guide      =
}}

==Specifications==

{{Specifications-Prosumer
|basic_specs              = yes
|width                    = 11.8 in. 
|height                   = 15.4 in.
|depth                    = 16.7 in.
|weight                   = 46 lbs
|watts                    = 1200
|volts                    = 120

|housing                  = yes
|housing_material         = Stainless Steel
|drip_tray_material       = Stainless Steel
|drip_tray_cover_material = Stainless Steel
|drip_tray_capacity       = 16 oz
|power_cord_length        = 56 in.

|cup_height               =
|max_cup_height           =

|frothing                 = yes
|wand_material            = Stainless Steel
|wand_style               = Commercial
|wand_movement            = Articulating
|usable_length            =
|height_off_counter       =
|number_of_holes          =
|no_burn_wand             = Yes
|optional_tips            = Yes

|water_source             = yes
|source_type              = Reservoir
|reservoir_capacity       = 95 oz
|reservoir_material       = Plastic
|reservoir_removable      = Yes

|controls                 = yes
|control_type             = Lever
|display_type             = LED
|temp_control             =
|pre_infusion             = Yes
|low_water_warning        = Yes
|energy_saving            =
|pressure_gauges          = Brew and Steam
|steam_control            =
|brew_temp_display        =

|cup_warmer               = yes
|warmer_material          = Stainless Steel
|warmer_size              = 10 x 9 in.
|warmer_type              = Passive

|portafilter              = yes
|portafilter_material     = Chrome Plated Brass
|portafilter_type         = Commercial Style
|quantity_included        = 2
|portafilter_weight       = 1.25 lbs
|portafilter_diameter     = 58 mm
|commercial_baskets       = Single and Double
|pressurized_baskets      =
|pod_compatibility        =
|bottomless_portafilter   = Yes
|tamper_size              = 58 mm

|brew_group               = yes
|group_material           = Chrome Plated Brass
|group_type               = E61
|preheat                  = Yes
|solenoid                 =
|capsule_friendly         =
|back_flushable           = Yes

|boiler_data              = yes
|num_boilers              = 1
|brew_steam_simultaneous  = Yes

|brew_boiler              = yes
|brew_boiler_type         = Heat Exchanger
|brew_boiler_wattage      = 1200
|brew_boiler_volume       = 1.8 Liter
|brew_boiler_material     = Copper with Brass End Plates
|brew_boiler_orientation  = Horizontal
|brew_element_location    = Internal
|brew_boiler_autofill     = Yes
|brew_boiler_insulated    =

|steam_boiler             = yes
|steam_boiler_type        = One Boiler for the Brew and Steam
|steam_boiler_wattage     =
|steam_boiler_volume      =
|steam_boiler_material    =
|steam_boiler_orientation =
|steam_element_location   =
|steam_vacuum_relief      =
|steam_boiler_insulated   =

|pump_data                = yes
|pump_type                = Vibration
|pump_wattage             =
|pump_pressure            = 18 Bar
|pump_pressure_adjust     = Yes
|pump_deairator           = Yes
|pump_self_prime          = 8-9 Bar

|performance              = yes
|heat_up                  =
|recommended_heat_up      = 900 secs
|steam_time_8             =
|hot_water_temp_8         =
|hot_water_time_8         =
|hot_water_recovery       = 0 secs
|brew_sound_level         =

|details                  = yes
|manufacture_country      = Italy
|nsf_certified            =
|recommended_application  = Home / Commercial
}}
 
<!-- Categories -->