View source for Gaggia Titanium/troubleshooting

{{Getting-Started
|brand = Gaggia
|machine_type = Super-Automatics
|product_banner = [[File:Wiki_ProductPageBanner_1200x175_GaggiaTitanium_v1.jpg]]
|product_page_title = Gaggia Titanium
|page_type = troubleshooting
|section1 = No Crema or Bad Tasting Shots
|anchor1 = Coffee Tastes Bad
|section2 = Difficulty Frothing
|anchor2 = Frothing Difficulty
|section3 = Flow Issues
|anchor3 = Flow Issues
|section4 = Machine Is Leaking
|anchor4 = Leaking Machine
|section5 = Machine Not Heating Or Powering On
|anchor5 = No Heat or Power
|section6 = Steaming Issues
|anchor6 = Steaming Issues
|section7 = Brew Unit Blocked Or Stuck
|anchor7 = Brew Unit Blocked Or Stuck
|section8 = No Beans, Grinder Blocked, Or E01 Error Code
|anchor 8 = Grinder Errors
|section9 = Screen Flashing
|anchor9 = Screen Flashing
|section10 = Machine Stuck In Rinsing
|anchor10 = Machine Stuck In Rinsing
|section11 = Cracked Cover
|anchor11 = Cracked Cover
|section12 = Refill Water Tank Message Won't Clear
|anchor12 = Refill Water Tank Message Won't Clear
|section13 = Part Fell Off The Brew Unit
|anchor13 = Part Fell Off The Brew Unit
}}
----
===No Crema or Bad Tasting Shots===

{{Troubleshooting-Super-No-Crema-Bad-Shots}}
----
===Difficulty Frothing===

{{Troubleshooting-Pannarello-Frothing}}
----
===Flow Issues===

The first place to start with any flow issue is cleaning the machine. Before going through these steps please make sure the machine is cleaned according to the [https://wiki.wholelattelove.com/Gaggia_Titanium/cleaning_and_maintenance  Cleaning & Maintenance] section of this article.

{{Troubleshooting-Gaggia-Super-E05
|uses_filter = No
}}
{{Troubleshooting-Gaggia-Super-Steam-Blocked}}
{{Template:Troubleshooting-Gaggia-Super-Brew-Blocked-Titanium}}
{{Troubleshooting-Gaggia-Super-Flow-Meter-Blocked}}

====Ventilate Message Won't Clear====

{{Content-Columns
|column_1 =
If the machine keeps giving a ventilate error it could be from significant scale buildup inside the machine, or a vapor lock in the pump. The video below will show you how to clear the ventilate message if the pump is vapor locked.
|column_2 =[[File:Wiki-YT-VentingGaggiaTitanium.jpg|center|link=https://www.youtube.com/watch?v=pewa3KhcX_U]]
|media_caption =Ventilating the Gaggia Titanium
}}
----

===Machine Is Leaking===

{{Troubleshooting-Gaggia-Super-Bottom-Leaking2}}
{{Troubleshooting-Gaggia-Super-Back-Leaking}}
{{Troubleshooting-Gaggia-Super-Wand-Leaking}}
----
===Machine Not Heating Or Powering On===

{{Troubleshooting-Gaggia-Super-No-Power}}
{{Troubleshooting-Gaggia-Super-Steam-Cold}}
{{Troubleshooting-Gaggia-Accademia-Brew-Cold}}
----
===Steaming Issues===

====Loose Steam Wand====

{{Troubleshooting-Gaggia-Titanium-Loose-Wand}}

====Steam Won't Activate, Steam Knob Loose or Spinning====

{{Troubleshooting-Gaggia-Titanium-Broken-Knob}}

====Too Much Steam/Milk Boiling====
{{Troubleshooting-Super-Steam-Too-Hot
|steam_test_instr = [https://wiki.wholelattelove.com/images/c/ca/ALL_MODELS_Steam_Test.pdf  Follow these instructions to perform a steam test.]
}}
----
===Brew Unit Blocked Or Stuck===

{{Troubleshooting-Gaggia-Accademia-Brew-Unit-Blocked}}
----
===No Beans, Grinder Blocked, Or E01 Error Code===

{{Troubleshooting-Gaggia-Titanium-Grinder-Cleaning}}
----
===Screen Flashing===

{{Troubleshooting-Gaggia-Super-Screen-Flashing}}
----
===Machine Stuck In Rinsing===

There are two separate rinsing cycles on this machine. There is a short rinse cycle that occurs when the machine is starting up, but there is also a formal cleaning rinse cycle. This cleaning rinse cycle is a forced maintenance and the machine cannot exit out of this function. The only way to complete this rinse cycle is to run the full cycle, which can take anywhere from 1-2 hours depending on how well water is flowing through the machine.

While the machine is in this rinse cycle <strong>DO NOT</strong> attempt to remove any of the internal machine components. Removal of these components can damage the machine. Also do not press any buttons or turn the machine on/off. If any buttons are pressed, or the machine is cycled on/off, it will reset the current rinse cycle and then add another rinse cycle to the queue.

To avoid accidental activation of this rinse cycle be careful not to hold the water droplet button down. Please be aware that certain menu options in the machine menu will activate a rinse cycle by default.
----
===Cracked Cover===

{{Troubleshooting-Gaggia-Titanium-Cracked-Cover}}
----
===Refill Water Tank Message Won't Clear===

{{Troubleshooting-Gaggia-Titanium-Tank-Magnet}}
----
===Part Fell Off The Brew Unit===

Older versions of the Titanium featured a splash guard on the brew unit, to reduce the amount of coffee sprayed inside the brew unit chamber. This part is removable, and is frequently mistaken for a broken part. The splash guard simply slides on and off the top of the brew unit. This part is not necessary for the function of the machine and is no longer included with new Titaniums.

<gallery class="center" widths="200px" heights="200px" mode="packed">
File:GAGGIA_TITANIUM_Guard_Attached.jpg|Brew unit with the splash guard attached.
File:GAGGIA_TITANIUM_Guard_Removed.jpg|Brew unit with the splash guard removed.
</gallery>